[sleyeguy]

Originally Posted by Mr.Dutch picture should work now, i replaced it. if the ps3 never was turned on with the wrong screw in it then ofcourse nothing can be damaged. get an usb hub to try or open the ps3 and measure the points i gave you.

I'm going to buy the hub. I have hubs, but none that plug into the wall.

Hypothetically, if the screw was in there, and it was turned on, there is no hope? (probably)

[Mr.Dutch]

Originally Posted by sleyeguy I'm going to buy the hub. I have hubs, but none that plug into the wall. Hypothetically, if the screw was in there, and it was turned on, there is no hope? (probably)

if a hub would work, there's hope.
technically if you have a 5V source and an old usb extend cable you could make your own external powered cable.

[sleyeguy]

Originally Posted by Mr.Dutch picture should work now, i replaced it. if the ps3 never was turned on with the wrong screw in it then ofcourse nothing can be damaged. get an usb hub to try or open the ps3 and measure the points i gave you.

So, I fixed it YAY~~

It appears that my first trace repair (using a liquid solder pen) connected both traces together. I scraped off the solder and this time taped off the two traces and one at a time, re-did them. After drying, all 4 usb ports work awesome and I can use my 3.41 !!!!! Backwards comp.. CECH-E01

Thank you all for your help

Sleyeguy