[3absiso]

Originally Posted by playerkp420 But was the clip not on secure, and the reason the dump was not valid. Then flashed the bad dump, with the clip still not secured properly?

let us hope, that is the case,
and the Ros0/1 can be saved

[playerkp420]

Originally Posted by 3absiso let us hope, that is the case, and the Ros0/1 can be saved

What were the %'s?

I wonder why at e3 forum, they told him it was valid. I bet they just used the e3 nor dump checker. LOL.

[3absiso]

Originally Posted by playerkp420 What were the %'s? I wonder why at e3 forum, they told him it was valid. I bet they just used the e3 nor dump checker. LOL.

First
Flowrebuilder extract without a problem, but
checking the dump with "norpatch"
Ros0/1 Not Valid

checking the Percentages of the official 00s were 18.26% which is fine

but when doing the patched one: FFs are 10.39%

I sent you the dump in private

[John_99]

so what I have to do now !

[3absiso]

Originally Posted by John_99 so what I have to do now !

If the clip is not seated properly, maybe the Ros0/1 Data still intact. if this is the case. re-seat the clip again and dump.
but let us see what other may say.

i am guessing here. since my knowledge in the E3 flasher is not good as ProgSkeet,

[haz367]

Originally Posted by 3absiso First Flowrebuilder extract without a problem, but checking the dump with "norpatch" Ros0/1 Not Valid

nvm if nothing todo with it

what OFW xxx was his origial dump? no i'm not sure hehe if "norpatch" from judges takes the latest 4.31 and what it reports on it aka >> unknown/not valid

he updated his Norpatch to include/detect OFW 4.30 recently tho...
Updated norpatch.exe to recognize OFW 4.30
the dump might be valid....check it just incase

[3absiso]

Originally Posted by haz367 nvm if nothing todo with it what OFW xxx was his origial dump? no i'm not sure hehe if "norpatch" from judges takes the latest 4.31 and what it reports on it aka >> unknown/not valid he updated his Norpatch to include/detect OFW 4.30 recently tho... Updated norpatch.exe to recognize OFW 4.30 the dump might be valid....check it just incase

norpatch is updated to OFW 4.31 and his FW on 4.30
also the patched Dump has FFs percentage Wrong
i have checked it.
you can check it also, if you want

[haz367]

no...ur on it...i just thought about..but hey i'm a little slow.....runs away to pickup latest Norpatch

[John_99]

so this means no hope

[playerkp420]

The %'s are like you say. But when I patch it with Three Musketeers, the %'s are good.

The statistic %'s have been throwing my head through loops, lately.

I just did a cech-2001b today, The 00's were 36.16% and the FF's were 8.82%. It was a dyn-001 mobo. But the metldr and bootldr was saying it was either a SUR-001 or JTP-001 or JSD-001
I kept trying to reseat the clip, thinking I had a bad connection. But I didn't, same result, everytime.

I asked the owner some history on the console. He said it had been fixed by Sony 2 times.
I patched with rogero nor dump patcher v0.01. And the %'s were good. So I flashed it, nervous at hell, thinking it was going to brick, but it didn't. And downgraded successfully.

I have seen a lot of 00's saying 18.25%, and the wiki says it should be 18.38% - 29.01%.
But I also seen the wiki says this:

Note: if you get deviating statistics, prepatch it so that both ROS and RVK areas are filled with 3.55 reference data. If still bad statistics, it means dump is bad in perconsole regions, prone to permabrick!

So I think if you patch it, and you get the correct %'s, you are good to go.

Now with this dump you sent me, when I patch it with the patcher from METHOD 2 of my guide, the FF's are too low from what it says on the wiki.
But when I patched it with METHOD 1 of my guide (Three Musketeers), the %'s are all good.
With it being on OFW 4.30, I would think that you could use that method to patch and flash.
But would like to hear what you guys think. I wouldn't want to tell him to flash it and brick.
Although he is already bricked?