[Mielonen]

I recently tried to downgrade my PS3 CECHL 80GB with E3 Flasher and it bricked due the E3_Downgrade.bin now I have soldered the SBE to Tristate and I think my NOR Dump is bad. Is there any change to fix my dump (I have 2 of them)?

[playerkp420]

Originally Posted by Mielonen I recently tried to downgrade my PS3 CECHL 80GB with E3 Flasher and it bricked due the E3_Downgrade.bin now I have soldered the SBE to Tristate and I think my NOR Dump is bad. Is there any change to fix my dump (I have 2 of them)?

Didn't you validate your dump before flashing?

You may have permabricked your console.

You can pm me your dumps and I will check them for you.

Don't do anymore flashing in the meantime.

[Mielonen]

Originally Posted by playerkp420 Didn't you validate your dump before flashing? You may have permabricked your console. You can pm me your dumps and I will check them for you. Don't do anymore flashing in the meantime.

Ok I can send the dumps. Can you add me on Skype: Mielone97

[playerkp420]

Originally Posted by Mielonen Ok I can send the dumps. Can you add me on Skype: Mielone97

Sorry don't have Skype. But after I check your dumps, I will give you a detailed instruction of how to try and fix your PS3.
************* [ - Post Merged - ] *************
@Mielonen

Your dumps are no good.
But you still have a chance.
What you need to do is follow this guide.

Your clip is not seated correctly. You will need to reseat it, and get it on good. Tape it down good with strong tape, and use some foam or something to keep permanent pressure on it.

Good luck.