[3absiso]

Originally Posted by s5moon http://www.mediafire.com/view/?iqbyoz3gyff15ek

Remove your Dump, it can be used to unban others PS3
قم بازاله الباك اب الخاص بك ممكن استخدامه لفك حظر الاجهزة الاخرى

[s5moon]

Originally Posted by 3absiso Remove your Dump, it can be used to unban others PS3 قم بازاله الباك اب الخاص بك ممكن استخدامه لفك حظر الاجهزة الاخرى

THIS NOT BAKUP OR DUMB ITS THE UPDATER_LOG.TXT

[3absiso]

Originally Posted by s5moon THIS NOT BAKUP OR DUMB ITS THE UPDATER_LOG.TXT

I know,
i am talking about the other link

[s5moon]

Originally Posted by 3absiso I know, i am talking about the other link

I JUST REMOVED IT
THANK YOU

[playerkp420]

Well it looks like the firmware was installed with success.

If the PUP file you used was indeed Rogero v3.7, it must have been corrupted.
Where did you download it? Did you check the md5?

You should follow the guide I linked in Post #6. And use this Rogero v3.7 for the FSM install.

Check the md5, with md5.exe. It should be: 8F8166B25D6BED891F292C77DE5C4B28

[s5moon]

It did not match OMG

So, i must do the guid in post 6.
But may you please show me where should i solder on the motherboar
I need aphoto
My PS3 is CECH-2004B (9D)




And thank you so much for your help and time

[3absiso]

Originally Posted by s5moon

Will isn't this shiiiiit.
flash back your Dump and make sure you use the right file: Here

[s5moon]

So, i must do the guid in post 6.
CAN SOMEONE please show me where should i solder on the motherboar
I need aphoto
My PS3 is CECH-2004B (9D)

==================
SPECIAL THANKS TO playerkp420 AND 3absiso

[playerkp420]

Originally Posted by s5moon So, i must do the guid in post 6. CAN SOMEONE please show me where should i solder on the motherboar I need aphoto My PS3 is CECH-2004B (9D) ================== SPECIAL THANKS TO playerkp420 AND 3absiso

Find your motherboard here: http://www.ps3devwiki.com/wiki/Hardware_flashing#NOR

The pics are labeled. Find the Nor Tristate. And solder a wire from there to the SBE point on the e3 ribbon.

Or you can solder the wire from the Nor Tristate to a GND point on the motherboard. If you do that, you will have to remove the wire after flashing the patched dump.

[s5moon]

okay ,so i have two way to do it the first one is



and its require removing the wire after flashing


the sacond one and ithink is the best because i can finish all my work whithout removing the wire ( is that right )