The above video goes away if you are logged in!

Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 31
  1. #1
    Apprentice
    Join Date
    Sep 2010
    Posts
    3
    Likes
    4
    Liked 6 Times in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Feedback Score
    0
    Downloads
    19
    Uploads
    0

    Cool [How-To] Update the PSJailbreak Clone!

    You Need:
    DB25 Male Connector or LPT Cable
    Soldering Iron
    Parallel port on your PC
    USB port on your PC
    ISP Programmer: http://dybkowski.net/pages/en/electr...software/2-isp
    HEX I used: http://www.multiupload.com/61NIE9N3GW

    How To:
    Solder these points from the Jailbreak to the LPT Cable or connector


    Then you should have something like this


    Programming:
    Open ISP Programmer and click Setup

    Type these settings:

    Click OK

    Connect to the PC parallel port and plug into USB aswell

    Press Reset ON (I changed paragraph Hz to 16 before the reset)

    Next press, Read Signature and if all goes well, this tells us what our device is
    AT90USB82/162, Flash: 16KB, EEPROM: 512 bytes

    Click ERASE.
    Now load the HEX (e.g Bootloader_AT90USB162v105.hex).

    Click on "Fuses and lock bits" to check the status of the fuses in our device.

    The factory fuses are 0xF4, 0xD9, 0x5E

    If not so, do them at that value and click on "Program" or "Program fuses and locks" (although deleting the AT and program our hex and should be with that value).

    Well, it only remains to give the button "Erase & Program All" in the window pricipalmente and we will have the bootloader restored.

    Thank You and good luck
    Last edited by ModThatGame; 11-29-2010 at 11:29 AM.

  2. The Following 6 Users Like This Post:


  3. #2

    Join Date
    Jan 2008
    Location
    In NeoSabin
    Posts
    17,055
    Likes
    10,261
    Liked 18,776 Times in 7,168 Posts
    Mentioned
    2066 Post(s)
    Tagged
    3 Thread(s)
    Feedback Score
    4 (100%)
    Downloads
    148
    Uploads
    111
    Great tutorial, thanks, front paged

  4. The Following User Likes This Post:


  5. #3
    Apprentice
    Join Date
    May 2008
    Posts
    20
    Likes
    4
    Liked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Feedback Score
    0
    Downloads
    4
    Uploads
    0
    wuuusaa... thats what i`ve been waiting for
    SONY.. it takes everything!!! Region Free Games, Other OS, PS2 BC, 2USB Ports, MC Reader, Chrome&Gloss Style... Whats next???

  6. The Following User Likes This Post:


  7. #4
    Apprentice
    Join Date
    Feb 2008
    Posts
    2
    Likes
    0
    Liked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Feedback Score
    0
    Downloads
    25
    Uploads
    0
    A much simpler solution: http://www.psjailbreak2.com/ psjailbreak fully compatible with the clone

  8. The Following User Likes This Post:


  9. #5
    null
    Join Date
    Sep 2010
    Posts
    35
    Likes
    5
    Liked 8 Times in 4 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Feedback Score
    0
    Downloads
    67
    Uploads
    0
    Can we use the maximus hex tool to flash other devices?

  10. #6
    Apprentice
    Join Date
    Oct 2010
    Posts
    1
    Likes
    0
    Liked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Feedback Score
    0
    Downloads
    3
    Uploads
    0
    Which usb driver to use? Windows7 is installing a driver called "Generic usb hub".

    My device is the same as shown on the picture but ISP programmer says "Unknown Device FF FF FF"

    What to do? The solution of dani1999, also doesn't work for me (also don't know which driver to use).

  11. #7
    Apprentice
    Join Date
    Sep 2010
    Posts
    3
    Likes
    4
    Liked 6 Times in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Feedback Score
    0
    Downloads
    19
    Uploads
    0

    Smile

    Quote Originally Posted by remco89 View Post
    Which usb driver to use? Windows7 is installing a driver called "Generic usb hub".

    My device is the same as shown on the picture but ISP programmer says "Unknown Device FF FF FF"

    What to do? The solution of dani1999, also doesn't work for me (also don't know which driver to use).
    This doesn't require a driver this method, its simply writing straight to the chip. Did you even solder the wires onto the Jailbreak because this is the most important part

  12. #8
    Apprentice
    Join Date
    Sep 2010
    Posts
    11
    Likes
    1
    Liked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Feedback Score
    0
    Downloads
    29
    Uploads
    0
    think you could figure this one out?

  13. #9
    Apprentice
    Join Date
    Sep 2010
    Posts
    3
    Likes
    4
    Liked 6 Times in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Feedback Score
    0
    Downloads
    19
    Uploads
    0

    Cool

    Quote Originally Posted by BULLDOGG View Post
    think you could figure this one out?
    Hmmm... What chip is it?, doesn't look like a AT90USB162 at all.

  14. #10

    Join Date
    Aug 2007
    Location
    Virginia US
    Posts
    3,203
    Likes
    1,804
    Liked 2,307 Times in 1,036 Posts
    Mentioned
    243 Post(s)
    Tagged
    0 Thread(s)
    Feedback Score
    0
    Downloads
    156
    Uploads
    0
    That looks like a pic in a way. It actually looks like some sort of logic gate but that can't be the case. I have no idea what chip that is.

Page 1 of 4 1 2 3 ... LastLast

Bookmarks

Bookmarks
  • Submit to Digg Digg
  • Submit to del.icio.us del.icio.us
  • Submit to StumbleUpon StumbleUpon
  • Submit to Google Google

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •